Open
5
Nov

8 Safety Musts When Dealing With Heavy Equipment

Share Us On:



Whether you require a skid steer, excavator, front loader, cranes, scrapers, heavy haul trucks or backhoe, heavy equipment can make all the difference in successfully getting the job done.

Heavy Equipment Safety

You definitely shouldn’t skimp on safety since failure to proper guidelines can result in damage to the equipment or possible serious injury to the operator or others nearby.

As a result, what follows is a run-down of 8 safety musts when dealing with heavy equipment. While many of them might appear to be common sense, injuries do happen so a primer on the dos and don’ts is always in order.

  1. Training
  2. The most important consideration on the safety front is proper operator training. You also need to ensure that training has a formal component that includes classroom-like instruction, expert demonstrations, hands-on exercises done by the trainee, and a test of the trainee’s performance.

  3. Manuals
  4. You need to ensure that equipment operators and vehicle maintenance staff have the applicable manuals so that they understand both how to properly and safely operate the heavy equipment and how to keep it in tip-top shape so that it serves your business needs for a long time.

  5. Proper Gear
  6. You must ensure that heavy equipment operators always wear the right sort of attire and protective gear such as work gloves, hearing protection, steel-toe work boots, hard hat, and more.

  7. Strap In
  8. Ensure that operators are always strapped in where applicable so as to ensure that they don’t go flying off of the heavy equipment if they get into some sort of collision or accident.

  9. Exit Property
  10. Avoid exiting a vehicle when it is still running. If operators need to get off of the heavy equipment, they should shut off the vehicle beforehand to minimize the chances of mishaps.

  11. Relieve Pressure
  12. Whenever the heavy equipment operators exit the vehicle, they should relieve pressure from the heavy equipment’s hydraulic controls.

  13. Remove Key
  14. Whenever the operators are done using the heavy equipment, they should, for safety reasons, remove the key from the ignition. This will ensure that no one can inadvertently gain unauthorized access.

  15. Inspections Matter
  16. Another important consideration is to regularly perform inspections to ensure that the heavy equipment is in good repair. In the event that something needs to be fixed or serviced, the best thing to do is to immediately remedy them before putting the heavy equipment back to work.

Using heavy equipment can help companies to get things done much faster than if they had to rely solely on manpower. By following some safety recommendations, companies can keep their operators safe and their business goals on track.

0
Comments



Leave a Reply

Your email address will not be published. Required fields are marked *