Open
17
Nov

5 Common Truck Repairs

Share Us On:



Fleet operators must have a clear understanding of the vehicles within their service to ensure they meet operational targets. And this requires comprehensive knowledge on truck repair requirements. To help guide the maintenance process within growing fleets, this latest post will highlight five common truck repairs for fleet operators.

The Most Common Truck Repairs

  1. Wheel Bearing Issues
  2. The wheel bearings are the component that keeps the wheel moving with as little friction as possible on the road. Truck drivers will notice that the bearings are being degraded by the amount of noise coming from their wheel wells as they move. Drivers might also experience vehicle jerking or unstable movements on the road. If any of these symptoms occur, it’s time to review the wheel bearings for problems.

  3. Brake Failures And Fluid Leaks
  4. With a larger payload placing pressure on the brakes, the braking systems within modern trucks can experience fluid leaks on a regular basis. In extreme circumstances, and in trucks that haven’t been maintained effectively, brake failure can also occur. Fortunately, if this does occur, the vehicle will only lose complete performance in one brake, allowing the driver to use their other brakes to stop the vehicle. But this highlights the value in implementing a comprehensive brake maintenance strategy.

  5. U-Joint Failure
  6. U-joints work to transfer power from the transmission to the differential. It’s critical to keep the U-joint lubricated to minimize wear and tear on the component. Drivers might notice a clicking sound if the U-joint is at the point of failure. They might also notice that their vehicle vibrates more at higher speeds. Each of these are signs that a critical part failure is imminent and the U-joint must be replaced at the earliest convenience.

  7. Starter Failure
  8. As temperatures drop across the country and trucks are used less often during the wintertime, many fleet operators discover their vehicles become more susceptible to starter failure. The starter mechanism should be reviewed carefully during the beginning of the winter season to determine performance, and operators should keep an eye on clear signs of starter problems, such as ignition troubles. Drivers should be advised to have radios and other non-essential components switched off during the motor start phase.

  9. Engine Overheating
  10. An overheating engine can have a number of significant consequences for both operators and drivers. The issue could be related to a fuel leak or a blown gasket, and if not addressed it can lead to engine failure over time. It’s critical to work with a maintenance professional to review vehicles for signs of overheating, to prevent failure in the long-term.

To discover more on common truck repair problems, contact our trusted team of maintenance professionals today!

0
Comments



Leave a Reply

Your email address will not be published. Required fields are marked *